Parameters |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
SSOP |
Number of Pins |
48 |
Published |
2009 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Discontinued |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
48 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
LIGHT DRIVE BALANCED OUTPUT WITH MINIMUM SWITCHING NOISE |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
48 |
Number of Outputs |
16 |
Qualification Status |
Not Qualified |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
6.4mA |
Number of Bits |
4 |
Propagation Delay |
1.5 ns |
Quiescent Current |
500μA |
Turn On Delay Time |
5.8 ns |
Family |
FCT |
Logic Function |
Buffer, Inverting |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.008 A |
High Level Output Current |
-8mA |
Low Level Output Current |
8mA |
Control Type |
ENABLE LOW |
Number of Input Lines |
4 |
Length |
15.9mm |
Width |
7.5mm |
Thickness |
2.3mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74FCT166244CTPVG Overview
Logical driver uses a neat SSOP package. 48 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This electronic part belongs to the FCT family of parts. 48 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 48 pins. Enhanced with 2 ports. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 500μA. It is recommended to use a 5V power supply. 4 bits are included within the electrical component. Logical driver features LIGHT DRIVE BALANCED OUTPUT WITH MINIMUM SWITCHING NOISE to better serve the need. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 8mA to its low level. In high level output mode, the electronic parts may conduct -8mA of current. Voltage used to run voltage buffer should be 5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. Because of its 4 lines level input capability, buffer IC is more cost-effective on transimitting signals. It is known as a BUS DRIVER logic IC. It is sufficient to make 16 outputs.
74FCT166244CTPVG Features
Bus Driver/Transceivers
LIGHT DRIVE BALANCED OUTPUT WITH MINIMUM SWITCHING NOISE
High Level Output: 8mA
Low Level Output: -8mA
BUS DRIVER Logic IC
74FCT166244CTPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT166244CTPVG Buffers & Transceivers applications.
- High-speed computer links
- Point-to-point networking
- Precision geodetic measurement
- Interconnection between switches and computers
- VoIP phones
- Wireless multimedia center in smart home
- Sensor reporting
- Single to Multimode Fiber Conversion
- Vehicle, ship, aircraft navigation and positioning
- LAN, SAN, WAN (local, storage, work area networks)