banner_page

74FCT16841ATPVCG4

D-Type, Latch 10 Bits Latches 56 Pins DUAL CMOS SSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-74FCT16841ATPVCG4
  • Package: SSOP
  • Datasheet: PDF
  • Stock: 982
  • Description: D-Type, Latch 10 Bits Latches 56 Pins DUAL CMOS SSOP(Kg)

Details

Tags

Parameters
Packaging Rail/Tube
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 56
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.635mm
Pin Count 56
Operating Supply Voltage 5V
Number of Elements 2
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 20.5mA
Current - Output 64mA
Number of Bits 10
Propagation Delay 13 ns
Quiescent Current 5μA
Turn On Delay Time 1.5 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.064 A
Prop. Delay@Nom-Sup 9 ns
High Level Output Current -32mA
Low Level Output Current 64mA
Number of Input Lines 20
Height 2.59mm
Length 18.41mm
Width 7.49mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Contact Plating Gold
Mount Surface Mount
Package / Case SSOP
Number of Pins 56
Weight 694.790113mg

74FCT16841ATPVCG4 Overview


A package called SSOP contains it. A Rail/Tube package is used to package it. The design of this electronic part contains 10 bits. The device consists of 56 terminations that are designed to be used in conjunction with it. In order to operate it, the supply voltage must be 5V. 56 pins are provided. In terms of electronic devices, this one is in the FCT family. This board has 56 pins on it, which is what it is designed for. The electronic part is mounted using the Surface Mount method. This device has 2 ports. This part can be found within the FF/Latches subcategory. A total of 5V power supplies are needed to run it. Electronic circuits comprise 20 input lines. The supply voltage should be maintained at 5V for high efficiency. Without external influences, it consumes 5μA quiescent current. It consists of 2 elements. There is 64mA low level output current set. It is set to zero for the high level output current. It is recommended to work at a temperature lower than 85°C. The operating temperature should be higher than -40°C. It supports a maximum supply voltage of 5.5V. With a voltage of 4.5V, it operates at its minimum capacity. As for the logic IC it uses, it is a BUS DRIVER. The output current of this device is 64mA, which makes it a very flexible design element.

74FCT16841ATPVCG4 Features


SSOP package
10 Bits
56 pin count
56 pins
5V power supplies
2 elements

74FCT16841ATPVCG4 Applications


There are a lot of Texas Instruments 74FCT16841ATPVCG4 Latches applications.

  • Up-Down Johnson
  • Frequency
  • Frequency dividing
  • Counting
  • Synchronous frequency dividers
  • Serial Output Register
  • Hammer
  • Programmable binary
  • A/D and D/A conversion
  • Parallel data synchronization

Write a review

Note: HTML is not translated!
    Bad           Good