74FCT16952ATPVCG4
| Parameters | |
|---|---|
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 1W |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT16952 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 10 ns |
| Quiescent Current | 5μA |
| Family | FCT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Transceiver, Non-Inverting |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Control Type | INDEPENDENT CONTROL |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.5mA |
| Translation | N/A |
| Height | 2.79mm |
| Length | 18.41mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 56 |
| Weight | 694.790113mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
74FCT16952ATPVCG4 Overview
Logical driver uses a neat 56-BSSOP (0.295, 7.50mm Width) package. Tube external packaging. Available in Surface Mount. Voltage buffer adopts Transceiver, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 64mA. Logical driver can deal with 3-State output (s). All of the 2 elements are put into use. Digital buffer is one of the 74FCT series devices. 56 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. Electronic parts from the FCT family are used in this part. 56 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 56 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. You can search "74FCT16952" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under INDEPENDENT CONTROL control technology. In quiescent state, the electronic part uses 5μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 16 bits are included within the electrical component. Logical driver adapts POSITIVE EDGE trigger.
74FCT16952ATPVCG4 Features
Bus Driver/Transceivers
Trigger Type: POSITIVE EDGE
74FCT16952ATPVCG4 Applications
There are a lot of Texas Instruments 74FCT16952ATPVCG4 Buffers & Transceivers applications.
- Satellite communications networks
- TV signal transmission
- Remote controls
- Copper and fiber optic cables connection network
- Radio transmission
- Car radio
- Laser diode bonding
- IP cameras
- Cable network front end
- Low power, low voltage systems
