Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
SSOP |
Number of Pins |
56 |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
56 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION |
Subcategory |
Bus Driver/Transceivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.635mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
56 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Number of Channels |
16 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Number of Ports |
2 |
Nominal Supply Current |
5μA |
Propagation Delay |
6.3 ns |
Quiescent Current |
5μA |
Turn On Delay Time |
7 ns |
Family |
FCT |
Logic Function |
Inverting, Transceiver |
Direction |
Bidirectional |
Output Characteristics |
3-STATE |
Logic IC Type |
REGISTERED BUS TRANSCEIVER |
Max I(ol) |
0.064 A |
Number of Bits per Element |
8 |
Trigger Type |
POSITIVE EDGE |
High Level Output Current |
64mA |
Low Level Output Current |
32mA |
Control Type |
INDEPENDENT CONTROL |
Translation |
N/A |
Length |
18.4mm |
Width |
7.5mm |
Thickness |
2.3mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74FCT16952CTPVG Overview
Logical driver uses a neat SSOP package. All of the 2 elements are put into use. 56 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a FCT family part that is attached to this electronic component. 56 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 56 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under INDEPENDENT CONTROL control technology. In quiescent state, the electronic part uses 5μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION to better serve the need. 16 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 32mA to its low level. In high level output mode, the electronic parts may conduct 64mA of current. Voltage used to run voltage buffer should be 4.5V at least. In regard to the maximum supply voltage, buffer driver is rated 5.5V. It is known as a REGISTERED BUS TRANSCEIVER logic IC. Logical driver adapts POSITIVE EDGE trigger.
74FCT16952CTPVG Features
Bus Driver/Transceivers
WITH INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION
High Level Output: 32mA
Low Level Output: 64mA
REGISTERED BUS TRANSCEIVER Logic IC
Trigger Type: POSITIVE EDGE
74FCT16952CTPVG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT16952CTPVG Buffers & Transceivers applications.
- LAN, SAN, WAN (local, storage, work area networks)
- transmission relay
- Wireless smart house
- Switching system
- Cordless telephone
- Wireless HD Photography
- Wireless network systems
- Televisions
- Cell phones
- VoIP phones