74FCT2245ATQG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 8 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Number of Bits | 8 |
| Propagation Delay | 4.6 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.2 ns |
| Family | FCT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS TRANSCEIVER |
| High Level Output Current | 12mA |
| Low Level Output Current | 15mA |
| Control Type | COMMON CONTROL |
| Translation | N/A |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT2245ATQG Overview
Logical driver uses a neat QSOP package. All of the 1 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. In the FCT family, the electric component belongs. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 10μA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. 8 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 15mA to its low level. In high level output mode, the electronic parts may conduct 12mA of current. Voltage used to run voltage buffer should be 4.75V at least. In regard to the maximum supply voltage, buffer driver is rated 5.25V. It is known as a BUS TRANSCEIVER logic IC.
74FCT2245ATQG Features
Bus Driver/Transceivers
High Level Output: 15mA
Low Level Output: 12mA
BUS TRANSCEIVER Logic IC
74FCT2245ATQG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT2245ATQG Buffers & Transceivers applications.
- Single to Multimode Fiber Conversion
- 1x/2x Fiber Channel
- AV receiver
- Car alarm systems
- Radio transmission
- Wireless communication
- Wireless showroom
- Satellite radio receiver
- Ethernet circuitry
- High-speed computer links
