74FCT2245ATSOG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Propagation Delay | 4.6 ns |
| Quiescent Current | 10μA |
| Turn On Delay Time | 6.2 ns |
| Family | FCT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS TRANSCEIVER |
| Number of Bits per Element | 8 |
| High Level Output Current | 12mA |
| Low Level Output Current | 48mA |
| Control Type | COMMON CONTROL |
| Translation | N/A |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT2245ATSOG8 Overview
Logical driver uses a neat SOIC package. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. FCT family part. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 10μA. It is recommended to use a 5V power supply. It is generally sold in TAPE AND REEL package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 48mA to its low level. In high level output mode, the electronic parts may conduct 12mA of current. Voltage used to run voltage buffer should be 4.75V at least. In regard to the maximum supply voltage, buffer driver is rated 5.25V. It is known as a BUS TRANSCEIVER logic IC. The fundamental operation of logical driver is based on 1 circuits.
74FCT2245ATSOG8 Features
Bus Driver/Transceivers
High Level Output: 48mA
Low Level Output: 12mA
BUS TRANSCEIVER Logic IC
74FCT2245ATSOG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT2245ATSOG8 Buffers & Transceivers applications.
- Televisions
- WDM transmission
- Wireless security systems
- AV receiver
- Wired telephone
- Gigabit Ethernet
- Wireless communication
- IPTV front end
- Thermal management
- Desktop radio
