74FCT2373ATQG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 12mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT2373ATQG Overview
The QSOP package contains it. The design of this electronic part is based on 8 bits. This device is designed with 20 terminations. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. It is a member of the FCT family of electronic devices. In addition, it is designed with a pin number of 20. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports that can be connected to it. A total of 5V power supplies are required for it to operate. A high level of efficiency is achieved by maintaining the supply voltage at 5V. 15mA represents the low level output current. The high level output current is set to 12mA. There should be a temperature below 85°C at which the system is operating. A temperature greater than -40°C should be used for operation. There is a maximum voltage supply of 5.25V that can be applied to it. With a voltage of 4.75V, it operates at its minimum capacity. It uses the logic IC BUS DRIVER.
74FCT2373ATQG Features
QSOP package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT2373ATQG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT2373ATQG Latches applications.
- Buffer register
- Parallel data synchronization
- Pattern Generators
- Programmable binary
- Avionics
- Buffer Storage
- Storage
- Parallel Output
- Shift Registers
- Communication systems
