74FCT2373ATQG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 12mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT2373ATQG8 Overview
A package called QSOP contains it. It is designed with 8 bits. In this device, there are 20 terminations. In order to function, the supply voltage should be set to 5V. 20 pins are provided. It is a member of the FCT family of electronic devices. This board has 20 pins on it, which is what it is designed for. This electronic part is mounted in the way of Surface Mount. This device has 2 ports that can be connected to it. A total of 5V power supplies are required for it to operate. The device's reliable performance makes it a good choice for TAPE AND REEL. A high level of efficiency is achieved by maintaining the supply voltage at 5V. 15mA represents the low level output current. 12mA is set as the high level output current. It is recommended to work at a temperature lower than 85°C. A temperature greater than -40°C should be used as the operating temperature. It supports a maximum supply voltage of 5.25V. It operates with the minimal supply voltage of 4.75V. There is a logic IC BUS DRIVER used in the system.
74FCT2373ATQG8 Features
QSOP package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT2373ATQG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT2373ATQG8 Latches applications.
- Counters
- PCs and Notebooks
- Stacked or Push-Down Registers
- Control circuits
- Ring counter
- Frequency dividing
- Counter timers
- OC-48 communication systems
- Watches
- Shift right register
