74FCT2373CTQG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 12mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Height | 1.47mm |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT2373CTQG Overview
QSOP contains it. The electronic part in this image has 8 bits. This device has been designed with 20 terminations available. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. FCT is the family name of this electronic device. It is designed with 20 pins. Electronic parts are mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. A total of 5V power supplies are needed to run it. High efficiency requires a supply voltage of 5V. 15mA is set as the low level output current. It has been set to 12mA for the high level output current. Lower than 85°C is the recommended operating temperature. It is recommended to operate at a temperature higher than -40°C. There is a maximum voltage supply of 5.25V that can be applied to it. In order for the machine to operate, the supply voltage must be 4.75V. There is a logic IC that it uses that is a BUS DRIVER.
74FCT2373CTQG Features
QSOP package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT2373CTQG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT2373CTQG Latches applications.
- A/D and D/A conversion
- Automotive Body Electronics
- Ring counter
- Parallel data synchronization
- Decade counting
- Timers
- Watches
- Parallel Input
- Automotive ADAS
- Up/down difference counting
