74FCT2373CTQG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 12mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Height | 1.47mm |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT2373CTQG8 Overview
QSOP contains it. This electronic part is designed with 8 Bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to operate it, the supply voltage must be 5V. 20 pins are available on it. It is a member of the FCT family of electronic devices. In addition, it is designed with a pin number of 20. It is mounted according to the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It operates from 5V power supplies. The reliability of this device makes it well suited to TAPE AND REEL. High efficiency requires a voltage supply of 5V. There is 15mA low level output current set. 12mA is set as the high level output current. Lower than 85°C is the recommended operating temperature. In order for the system to operate properly, the operating temperature should be higher than -40°C. There is a maximum supply voltage of 5.25V supported by this device. It operates with the minimal supply voltage of 4.75V. BUS DRIVER is the logic IC it uses.
74FCT2373CTQG8 Features
QSOP package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT2373CTQG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT2373CTQG8 Latches applications.
- Shift left with parallel loading
- Hammer
- BCD counting
- Display
- Automotive Cluster
- Network Switches
- Automatic test equipment
- Up-Down Johnson
- Counter
- Multistage ripple counting
