74FCT2373CTSOCTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 4.7 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74FCT2373CTSOCTG4 Overview
Package 20-SOIC (0.295, 7.50mm Width) includes it. A package of Tape & Reel (TR) has been used. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. With a supply voltage of 4.75V~5.25V, it operates. There is -40°C~85°C operating temperature. 74FCT is the series number of this FPGA. The design of this electronic part is based on 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family in which it belongs to is 74FCT2373. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. This electronic device belongs to the family of FCT. This board has 20 pins on it, which is what it is designed for. The electronic part is mounted using the Surface Mount method. This device has 2 ports that can be connected to it. Subcategory FF/Latches includes this part. When Vsup reaches 5.25V, the maximal supply voltage is reached. There is 5V power supply for it. It is recommended to have a higher supply voltage (Vsup) than 4.75V. There are 8 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Based on its reliable performance, this device is well suited to TAPE AND REEL. Its 12mA output current allows for maximum design flexibility.
74FCT2373CTSOCTG4 Features
20-SOIC (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT2373 family
20 pin count
20 pins
5V power supplies
74FCT2373CTSOCTG4 Applications
There are a lot of Texas Instruments 74FCT2373CTSOCTG4 Latches applications.
- Parallel data synchronization
- Address register
- Timers
- OC-48 communication systems
- Lamp and Display (LED)
- Relay replacement
- Automotive Infotainment
- Instrumentation
- Watches
- BCD counting
