74FCT2374CTSOCTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 15mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74FCT2374CTSOCTE4 Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. This output is configured with Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74FCTseries contain this type of chip. D latch consists of 1 elements. As a result, it consumes 200μA of quiescent current without being affected by external factors. 20terminations have occurred. The 74FCT2374 family contains it. Power is provided by a 5V supply. Input capacitance of this device is 5pF farads. It is a member of the FCTfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. This board has 20 pins. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. The maximal supply voltage (Vsup) reaches 5.25V. Normally, the supply voltage (Vsup) should be above 4.75V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. The system runs on a power supply of 5V watts. This D flip flop is equipped with 0 ports. The 12mA output current allows it to be designed with the greatest amount of flexibility. It operates with 3 output lines. This frequency can be achieved 250MHz.
74FCT2374CTSOCTE4 Features
Tape & Reel (TR) package
74FCT series
20 pins
5V power supplies
74FCT2374CTSOCTE4 Applications
There are a lot of Texas Instruments 74FCT2374CTSOCTE4 Flip Flops applications.
- Common Clocks
- Divide a clock signal by 2 or 4
- Buffer registers
- Balanced Propagation Delays
- Balanced 24 mA output drivers
- Dynamic threshold performance
- High Performance Logic for test systems
- Storage registers
- Single Up Count-Control Line
- CMOS Process
