74FCT2374CTSOCTG4
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
74FCT2374CTSOCTG4 Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. A supply voltage of 4.75V~5.25V is required for operation. Temperature is set to -40°C~85°C TA. D-Typeis the type of this D latch. The FPGA belongs to the 74FCT series. There are 1 elements in it. It consumes 200μA of quiescent current without being affected by external factors. Terminations are 20. The 74FCT2374family includes it. Power is provided by a 5V supply. JK flip flop input capacitance is 5pF farads. In terms of electronic devices, this device belongs to the FCTfamily of devices. There is an electronic part that is mounted in the way of Surface Mount. A total of 20pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. It is designed with a number of bits of 8. Vsup reaches its maximum value at 5.25V. For normal operation, the supply voltage (Vsup) should be above 4.75V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. An electrical current of 5V volts is applied to it. The D flip flop has no ports embedded. Its output current of 12mAallows for maximum design flexibility. 8input lines are available for you to choose from. The frequency that can be achieved is 250MHz.
74FCT2374CTSOCTG4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
74FCT2374CTSOCTG4 Applications
There are a lot of Texas Instruments 74FCT2374CTSOCTG4 Flip Flops applications.
- Data Synchronizers
- Communications
- Digital electronics systems
- Automotive
- CMOS Process
- Computing
- Storage registers
- Synchronous counter
- Single Up Count-Control Line
- Dynamic threshold performance
