74FCT244CTPGG8
| Parameters | |
|---|---|
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 5.8 ns |
| Quiescent Current | 1mA |
| Family | FCT |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 4 |
| High Level Output Current | -15mA |
| Low Level Output Current | 15mA |
| Control Type | ENABLE LOW |
| Height | 1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
74FCT244CTPGG8 Overview
Logical driver uses a neat TSSOP package. All of the 2 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This logical driver is a member of the FCT family. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 1mA. It is recommended to use a 5V power supply. It is generally sold in TAPE AND REEL package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 15mA to its low level. In high level output mode, the electronic parts may conduct -15mA of current. Voltage used to run voltage buffer should be 4.75V at least. In regard to the maximum supply voltage, buffer driver is rated 5.25V. It is known as a BUS DRIVER logic IC. It is sufficient to make 8 outputs.
74FCT244CTPGG8 Features
Bus Driver/Transceivers
High Level Output: 15mA
Low Level Output: -15mA
BUS DRIVER Logic IC
74FCT244CTPGG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT244CTPGG8 Buffers & Transceivers applications.
- Switching system
- Wireless teaching
- AV receiver
- Broadcast application
- Bar, KTV wireless entertainment
- Thermal management
- TV signal transmission
- VoIP phones
- Fiber distributed data interface (FDDI)
- Mainframes, workstations or storage devices
