74FCT245CTQG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Ports | 2 |
| Propagation Delay | 5.8 ns |
| Quiescent Current | 10μA |
| Family | FCT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS TRANSCEIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Control Type | COMMON CONTROL |
| Translation | N/A |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT245CTQG8 Overview
Logical driver uses a neat QSOP package. All of the 1 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a FCT family part that is attached to this electronic component. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under COMMON CONTROL control technology. In quiescent state, the electronic part uses 10μA. It is recommended to use a 5V power supply. It is generally sold in TAPE AND REEL package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 15mA to its low level. In high level output mode, the electronic parts may conduct 64mA of current. Voltage used to run voltage buffer should be 4.75V at least. In regard to the maximum supply voltage, buffer driver is rated 5.25V. It is known as a BUS TRANSCEIVER logic IC.
74FCT245CTQG8 Features
Bus Driver/Transceivers
High Level Output: 15mA
Low Level Output: 64mA
BUS TRANSCEIVER Logic IC
74FCT245CTQG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT245CTQG8 Buffers & Transceivers applications.
- Clock radio
- Satellite radio receiver
- Broadcast application
- Wireless interactive experience
- Carrier phase observations
- Wireless multimedia center in smart home
- Portable radio
- Vehicle, ship, aircraft navigation and positioning
- 1x/2x Fiber Channel
- Desktop radio
