74FCT3244APYG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Packaging | Tape and Reel |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | INPUTS CAN BE DRIVEN BY 3.3V OR 5V COMPONENTS |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Propagation Delay | 6.2 ns |
| Quiescent Current | 30μA |
| Family | FCT |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 4 |
| High Level Output Current | -8mA |
| Low Level Output Current | 8mA |
| Control Type | ENABLE LOW |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.73mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT3244APYG8 Overview
Logical driver uses a neat SSOP package. Tape and Reel external packaging. All of the 2 elements are put into use. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 3.3V. Electronic parts from the FCT family are used in this part. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. The bus transceiver employs 4 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 30μA. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. Logical driver features INPUTS CAN BE DRIVEN BY 3.3V OR 5V COMPONENTS to better serve the need. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 8mA to its low level. In high level output mode, the electronic parts may conduct -8mA of current. Voltage used to run voltage buffer should be 2.7V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. It is known as a BUS DRIVER logic IC. It is sufficient to make 8 outputs.
74FCT3244APYG8 Features
Bus Driver/Transceivers
INPUTS CAN BE DRIVEN BY 3.3V OR 5V COMPONENTS
High Level Output: 8mA
Low Level Output: -8mA
BUS DRIVER Logic IC
74FCT3244APYG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT3244APYG8 Buffers & Transceivers applications.
- Satellite communications networks
- Wireless multimedia center in smart home
- AV receiver
- Fiber optic cable connection network
- Wireless showroom
- Wireless interactive experience
- Wireless security systems
- Wireless teaching
- Remote controls
- Wireless access points
