74FCT3573AQG
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.024 A |
| High Level Output Current | 24mA |
| Low Level Output Current | 8mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT3573AQG Overview
In the package QSOP, it can be found. This electronic part is designed with 8 Bits. A device with this design has 20 terminations. With the supply voltage set at 3.3V, it is able to operate. There are 20 pins attached to it. FCT is the family name of this electronic device. There are 20 pins on it. It is mounted according to the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. On the basis of its reliability, this device is well suited for TUBE. A high level of efficiency is achieved by maintaining the supply voltage at 3.3V. In the low level output current, the value is set to 8mA. There is 24mA output current at the high level. Ideally, the temperature should not be higher than 85°C. -40°C is the minimum operating temperature. Voltages up to 3.6V can be supplied. The minimal supply voltage is 2.7V. The logic IC it adopts is BUS DRIVER.
74FCT3573AQG Features
QSOP package
8 Bits
20 pin count
20 pins
74FCT3573AQG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT3573AQG Latches applications.
- Counter control
- Instrumentation
- Serial Output Register
- Shift right with parallel loading
- Digital bus buffer
- Communication systems
- Double bus register system
- A/D and D/A conversion
- Pattern generators
- Buffer register
