banner_page

74FCT3573AQG8

Latch 8 Bits Latches 20 Pins DUAL CMOS QSOP


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-74FCT3573AQG8
  • Package: QSOP
  • Datasheet: PDF
  • Stock: 822
  • Description: Latch 8 Bits Latches 20 Pins DUAL CMOS QSOP(Kg)

Details

Tags

Parameters
Contact Plating Tin
Mount Surface Mount
Package / Case QSOP
Number of Pins 20
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature BROADSIDE VERSION OF 373
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 3.3V
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Max Supply Voltage 3.6V
Min Supply Voltage 2.7V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 8.5 ns
Turn On Delay Time 2 ns
Family FCT
Logic Function Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.024 A
High Level Output Current 24mA
Low Level Output Current 8mA
Independent Circuits 1
Length 8.7mm
Width 3.8mm
Thickness 1.47mm
RoHS Status RoHS Compliant
Lead Free Lead Free

74FCT3573AQG8 Overview


In the QSOP package, it is embedded. With this electronic part, there are 8 bits. This device has 20 terminations. A 3.3V voltage supply is required for operation. There are 20 pins on it. In terms of electronic devices, this one is in the FCT family. The pin configuration of the device is 20. Surface Mount is used to mount this electronic part. 2 ports are available on this device. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. High efficiency requires a voltage supply of 3.3V. There are also other characteristics of it, such as BROADSIDE VERSION OF 373. It has been set to 8mA for the low level output current. It is set to zero for the high level output current. It is recommended to work at a temperature lower than 85°C. It is recommended to operate at a temperature higher than -40°C. There is a maximum voltage of 3.6V supported. The minimal voltage for operation is 2.7V. There is a logic IC that it uses that is a BUS DRIVER.

74FCT3573AQG8 Features


QSOP package
8 Bits
20 pin count
20 pins

74FCT3573AQG8 Applications


There are a lot of Integrated Device Technology (IDT) 74FCT3573AQG8 Latches applications.

  • Decade counting
  • Phase comparator
  • Pattern Generators
  • Control circuits
  • Decade counting 7-segment decimal display
  • Shift register
  • Parallel data storage
  • Parallel data synchronization
  • BCD counting
  • Clocks

Write a review

Note: HTML is not translated!
    Bad           Good