Parameters |
Height |
1.73mm |
Length |
7.2mm |
Width |
5.3mm |
Thickness |
1.73mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
SSOP |
Number of Pins |
20 |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
POWER OFF DISABLE OUTPUTS |
Packing Method |
TUBE |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
8.5 ns |
Turn On Delay Time |
2 ns |
Family |
FCT |
Logic Function |
Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
48mA |
Low Level Output Current |
15mA |
Independent Circuits |
1 |
74FCT373ATPYG Overview
In the package SSOP, it can be found. This electronic part is designed with 8 Bits. This device is designed with 20 terminations. In order to operate it, the supply voltage must be 5V. The 20 pind are equipped with it. It is part of the family of electronic devices called FCT. With the design of the board, there are only 20 pins. Surface Mount is the method used for mounting this electronic part. As far as ports are concerned, this device has 2 ports. A total of 5V power supplies are required for it to operate. As a result of its reliable performance, it is well suited for TUBE. High efficiency requires a supply voltage of 5V. There is also POWER OFF DISABLE OUTPUTS characteristics to it. It is set to zero for the low level output current. In the high level output current, the value is set to 48mA. Ideally, the operating temperature should be lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. There is a maximum voltage supply of 5.25V that can be applied to it. In order for the machine to operate, the supply voltage must be 4.75V. The logic IC it adopts is BUS DRIVER.
74FCT373ATPYG Features
SSOP package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT373ATPYG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT373ATPYG Latches applications.
- Buffer register
- Parallel data synchronization
- Avionics
- Sample and hold register
- Serial Input
- Counter control
- Up/down difference counting
- Shift left register
- Ring counter
- Synchronous frequency dividers