banner_page

74FCT373ATQG

Latch 8 Bits Latches 20 Pins DUAL CMOS QSOP


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-74FCT373ATQG
  • Package: QSOP
  • Datasheet: PDF
  • Stock: 186
  • Description: Latch 8 Bits Latches 20 Pins DUAL CMOS QSOP(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case QSOP
Number of Pins 20
Published 2007
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature POWER OFF DISABLE OUTPUTS
Packing Method TUBE
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 8.5 ns
Turn On Delay Time 2 ns
Family FCT
Logic Function Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
High Level Output Current 48mA
Low Level Output Current 15mA
Independent Circuits 1
Length 8.7mm
Width 3.8mm
Thickness 1.47mm
RoHS Status RoHS Compliant
Lead Free Lead Free

74FCT373ATQG Overview


There is an embedded version of it in package QSOP. 8 Bits are used in the design of this electronic part. A device such as this has 20 terminations designed. The device works with a voltage of 5V for its supply voltage. 20 pins are included. It is part of the family of electronic devices called FCT. There are 20 pins on it. Surface Mount is used to mount this electronic part. This device has 2 ports on board, which are all available at the same time. There are 5V power supplies required for this machine to operate. The reliability of this device makes it well suited to TUBE. High efficiency requires a voltage supply of 5V. It also has characteristics of POWER OFF DISABLE OUTPUTS. 15mA is the low level output current. 48mA is set as the high level output current. Ideally, the operating temperature should be lower than 85°C. In order for the system to operate properly, the operating temperature should be higher than -40°C. The maximum supply voltage is 5.25V. In order for the machine to operate, the supply voltage must be 4.75V. There is a logic IC that it uses that is a BUS DRIVER.

74FCT373ATQG Features


QSOP package
8 Bits
20 pin count
20 pins
5V power supplies

74FCT373ATQG Applications


There are a lot of Integrated Device Technology (IDT) 74FCT373ATQG Latches applications.

  • Serial Output Data Queuing
  • Double bus register system
  • Counting
  • Counter timers
  • Multistage ripple counting
  • Four-bit storage with output enable
  • General-Purpose Register
  • Serial Output Register
  • Meter applications
  • Pattern generators

Write a review

Note: HTML is not translated!
    Bad           Good