74FCT373ATSOG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | POWER OFF DISABLE OUTPUTS |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting, Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 10μA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 48mA |
| Low Level Output Current | 15mA |
| Number of Input Lines | 8 |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT373ATSOG Overview
The package in which it is embedded is named SOIC. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. With a supply voltage of 5V, it operates. 20 pins are included. It is a member of the FCT family of electronic devices. The device has 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. This device has a total of 2 ports. A total of 5V power supplies are required for it to operate. In the circuit, there are 8 input lines that are constituted by an electronic circuit. For maximum efficiency, the supply voltage should be set to 5V. It consists of 1 elements. There are also other characteristics of it, such as POWER OFF DISABLE OUTPUTS. There is 15mA low level output current set. In the high level output current, the value is set to 48mA. Ideally, the temperature should not be higher than 85°C. It is recommended to operate at a temperature higher than -40°C. 5.25V is the maximum voltage it supports. A voltage of 4.75V is the minimum supply voltage required for it to operate. It uses a logic IC of type BUS DRIVER.
74FCT373ATSOG Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
1 elements
74FCT373ATSOG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT373ATSOG Latches applications.
- Relay replacement
- Parallel-to-Serial Data Conversion
- Shift left with parallel loading
- Parallel Input
- Parallel data storage
- Counting
- Lamp and Display (LED)
- Shift register
- Storage
- Timers
