Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
20 |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
POWER OFF DISABLE OUTPUTS |
Packing Method |
TAPE AND REEL |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
8.5 ns |
Turn On Delay Time |
2 ns |
Family |
FCT |
Logic Function |
Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
48mA |
Low Level Output Current |
15mA |
Independent Circuits |
1 |
Height Seated (Max) |
2.65mm |
Length |
12.8mm |
Width |
7.6mm |
Thickness |
2.34mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74FCT373ATSOG8 Overview
The SOIC package contains it. A package of Tape & Reel (TR) has been used. The design of this electronic part is based on 8 bits. A device such as this has 20 terminations designed. The device works with a voltage of 5V for its supply voltage. 20 pins are provided. In the world of electronics, this electronic device belongs to the family of FCT. There are 20 pins on it. Surface Mount is used to mount this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is 5V power supply for it. Based on its reliable performance, this device is appropriate for TAPE AND REEL. The supply voltage should be maintained at 5V for high efficiency. In addition, POWER OFF DISABLE OUTPUTS characterize it. The low level output current is set to 15mA. The high level output current is set to 48mA. Ideally, the temperature should not be higher than 85°C. A temperature greater than -40°C should be used as the operating temperature. Voltages up to 5.25V can be supplied. It operates with the minimal supply voltage of 4.75V. The logic IC it adopts is BUS DRIVER.
74FCT373ATSOG8 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT373ATSOG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT373ATSOG8 Latches applications.
- Counter
- BCD counting
- Up-Down Johnson
- Decade counting
- Bus system register with enable parallel lines at bus side
- Serial Input
- Multi-line decoders
- Ring counter
- Counter control
- Up/down difference counting