Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Package / Case |
SSOP |
Number of Pins |
20 |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Additional Feature |
POWER OFF DISABLE OUTPUTS |
Packing Method |
TUBE |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.25V |
Min Supply Voltage |
4.75V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
5.5 ns |
Turn On Delay Time |
2 ns |
Family |
FCT |
Logic Function |
Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
High Level Output Current |
48mA |
Low Level Output Current |
15mA |
Independent Circuits |
1 |
Length |
7.2mm |
Width |
5.3mm |
Thickness |
1.73mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
74FCT373CTPYG Overview
In the SSOP package, it is embedded. There are 8 bits in this electronic part. This device has been designed with 20 terminations available. A 5V voltage supply is required for operation. 20 pins are included. There is a device in this electronic family called FCT. It is designed with 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. It operates from 5V power supplies. Based on its reliable performance, this device is suitable for TUBE. A high level of efficiency is achieved by maintaining the supply voltage at 5V. There are also characteristics of POWER OFF DISABLE OUTPUTS associated with it. It has been set to 15mA for the low level output current. 48mA is set as the high level output current. Operating temperatures should be below 85°C. It is recommended that the operating temperature be higher than -40°C. There is a maximum voltage supply of 5.25V that can be applied to it. There is a minimum supply voltage of 4.75V for it. There is a logic IC that it uses that is a BUS DRIVER.
74FCT373CTPYG Features
SSOP package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT373CTPYG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT373CTPYG Latches applications.
- Shift left with parallel loading
- OC-48 communication systems
- High-speed logic
- Automotive Infotainment
- Sample and hold register
- Shift Registers
- Shift register
- Programmable binary
- Hammer Device Information
- Counting