74FCT373CTPYG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | POWER OFF DISABLE OUTPUTS |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 48mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Length | 7.2mm |
| Width | 5.3mm |
| Thickness | 1.73mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT373CTPYG8 Overview
There is an embedded version of it in package SSOP. Tape & Reel (TR) is the packaging method. An electronic part with 8 bits is designed. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The device is operated when the supply voltage is set to 5V. There are 20 pins attached to it. This electronic device is categorized as a FCT electronic device. It is designed with 20 pins. Electronic parts are mounted using the Surface Mount method. This device is equipped with 2 ports. A total of 5V power supplies are needed to run it. The device's reliable performance makes it a good choice for TAPE AND REEL. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It also has characteristics of POWER OFF DISABLE OUTPUTS. The low level output current is set to 15mA. There is 48mA high level output current set. A temperature below 85°C should be used for operation. There should be a temperature above -40°C at which the device operates. It is capable of providing a maximum supply voltage of 5.25V. The minimal voltage for operation is 4.75V. It uses the logic IC BUS DRIVER.
74FCT373CTPYG8 Features
SSOP package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT373CTPYG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT373CTPYG8 Latches applications.
- Automotive Cluster
- Parallel data storage
- High-speed logic
- Serial Output Register
- Shift left register
- Parallel Input
- Sample and hold register
- Multistage ripple counting
- Pseudo-random code generators
- Clocks
