banner_page

74FCT373CTQG8

Latch 8 Bits Latches 20 Pins DUAL CMOS QSOP


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-74FCT373CTQG8
  • Package: QSOP
  • Datasheet: PDF
  • Stock: 447
  • Description: Latch 8 Bits Latches 20 Pins DUAL CMOS QSOP(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case QSOP
Number of Pins 20
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature POWER OFF DISABLE OUTPUTS
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.635mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 5.5 ns
Turn On Delay Time 2 ns
Family FCT
Logic Function Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
High Level Output Current 48mA
Low Level Output Current 15mA
Independent Circuits 1
Length 8.7mm
Width 3.8mm
Thickness 1.47mm
RoHS Status RoHS Compliant
Lead Free Lead Free

74FCT373CTQG8 Overview


The package in which it is embedded is named QSOP. 8 Bits are used in the design of this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It operates with a supply voltage of 5V. 20 pins are included. It is a member of the FCT family of electronic devices. The device has 20 pins. It is mounted according to the Surface Mount method. In this device, there is a total of 2 ports available for use. There are 5V power supplies attached to it. Based on its reliable performance, this device is appropriate for TAPE AND REEL. A high level of efficiency is achieved by maintaining the supply voltage at 5V. It also has characteristics of POWER OFF DISABLE OUTPUTS. The low level output current is set to 15mA. It has been set to 48mA for the high level output current. The operating temperature should be lower than 85°C. Temperatures higher than -40°C should be used for operation. It is capable of providing a maximum supply voltage of 5.25V. This device requires a minimum voltage of 4.75V. It uses the logic IC BUS DRIVER.

74FCT373CTQG8 Features


QSOP package
8 Bits
20 pin count
20 pins
5V power supplies

74FCT373CTQG8 Applications


There are a lot of Integrated Device Technology (IDT) 74FCT373CTQG8 Latches applications.

  • Shift Registers
  • Parallel Input
  • Shift left with parallel loading
  • Data acquisition
  • Serial Output Register
  • Timers
  • Storage
  • Buffer Storage
  • Watches
  • Parallel Output

Write a review

Note: HTML is not translated!
    Bad           Good