74FCT373CTSOG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | POWER OFF DISABLE OUTPUTS |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 48mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT373CTSOG Overview
SOIC contains it. With this electronic part, there are 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The device is operated when the supply voltage is set to 5V. 20 pins are included. There is a device in this electronic family called FCT. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. 2 ports are available on this device. 5V power supplies are needed to operate it. Its reliable performance makes it an excellent choice for TUBE. In order to achieve high efficiency, the supply voltage should be kept at 5V. It also has characteristics of POWER OFF DISABLE OUTPUTS. 15mA is set as the low level output current. It is set to zero for the high level output current. Operating temperatures should be below 85°C. The operating temperature should be higher than -40°C. It supports a maximum supply voltage of 5.25V. It operates with the minimal supply voltage of 4.75V. It uses a logic IC of type BUS DRIVER.
74FCT373CTSOG Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT373CTSOG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT373CTSOG Latches applications.
- General-Purpose Register
- Parallel data storage
- Hammer
- Data acquisition
- Automotive Cluster
- Four-bit storage with output enable
- Shift left with parallel loading
- Frequency
- Serial Input
- Phase comparator
