banner_page

74FCT373CTSOG8

Latch 8 Bits Latches 20 Pins DUAL CMOS SOIC


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-74FCT373CTSOG8
  • Package: SOIC
  • Datasheet: PDF
  • Stock: 173
  • Description: Latch 8 Bits Latches 20 Pins DUAL CMOS SOIC(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Tin
Mount Surface Mount
Package / Case SOIC
Number of Pins 20
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature POWER OFF DISABLE OUTPUTS
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Load Capacitance 50pF
Number of Ports 2
Number of Bits 8
Propagation Delay 5.5 ns
Turn On Delay Time 2 ns
Family FCT
Logic Function Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
High Level Output Current 48mA
Low Level Output Current 15mA
Independent Circuits 1
Height Seated (Max) 2.65mm
Length 12.8mm
Width 7.6mm
Thickness 2.34mm
RoHS Status RoHS Compliant
Lead Free Lead Free

74FCT373CTSOG8 Overview


In the SOIC package, it can be found as an embedded module. There are 8 bits in this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The supply voltage of the device is 5V. 20 pins are included. There is a device in this electronic family called FCT. The pin configuration of the device is 20. Surface Mount is the way in which this electronic part is mounted. As far as ports are concerned, this device has 2 ports. 5V power supplies are needed to operate it. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. Optimal efficiency requires 5V as the supply voltage. There are also characteristics of POWER OFF DISABLE OUTPUTS associated with it. In the low level output current, the value is set to 15mA. In the high level output current, the value is set to 48mA. A temperature below 85°C should be used for operation. Temperatures above -40°C should be used. There is a maximum supply voltage of 5.25V supported by this device. With a voltage of 4.75V, it operates at its minimum capacity. As for the logic IC it uses, it is a BUS DRIVER.

74FCT373CTSOG8 Features


SOIC package
8 Bits
20 pin count
20 pins
5V power supplies

74FCT373CTSOG8 Applications


There are a lot of Integrated Device Technology (IDT) 74FCT373CTSOG8 Latches applications.

  • Double bus register system
  • Stacked or Push-Down Registers
  • Up-Down Johnson
  • Counter
  • Decade counting 7-segment decimal display
  • Counting
  • Decade counting
  • Shift left with parallel loading
  • TV Set-top Boxes
  • Serial Output Register

Write a review

Note: HTML is not translated!
    Bad           Good