74FCT374ATSOG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 6.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -15mA |
| Low Level Output Current | 15mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 6pF |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT374ATSOG8 Overview
SOICis the way it is packaged. A total of 1 elements are present. There are 20 terminations,The power source is powered by 5V. Devices in the FCTfamily are electronic devices. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 20. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 8bits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It operates from 5V power supplies. A D flip flop with 2embedded ports is available. If high efficiency is desired, the supply voltage should be kept at 5V. It consumes 1mA current. A -15mAvalue is set for the high level output current. It is set to 15mAfor low level output current. If the operating temperature is lower than 85°C, it is recommended. Operating temperatures should be above -40°C. The system operates with a minimum supply voltage of 4.75V. 5.25Vis its maximum supply voltage. It uses BUS DRIVERas its logic IC. The T flip flop is equipped with 1functions . The D latch is equipped with 20 pins.
74FCT374ATSOG8 Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
74FCT374ATSOG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT374ATSOG8 Flip Flops applications.
- ATE
- Event Detectors
- Guaranteed simultaneous switching noise level
- Buffer registers
- Communications
- Patented noise
- Registers
- Parallel data storage
- Computing
- Power down protection
