74FCT374CTSOG
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 5.2 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -15mA |
| Low Level Output Current | 15mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 6pF |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2007 |
74FCT374CTSOG Overview
It is embeded in SOIC case. There are 1 elements in it. The number of terminations is 20. A voltage of 5V is used to power it. In terms of electronic devices, this device belongs to the FCTfamily of devices. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device has Positive Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 8 Bits. In light of its reliable performance, this T flip flop is well suited for TUBE. An electrical current of 5V volts is applied to it. A total of 2ports are embedded in the D flip flop. In order to achieve high efficiency, the supply voltage should be maintained at 5V. In terms of quiescent current, it consumes 1mA . In this case, the high level output current is set to -15mA. 15mA is the low level output current. It is recommended that the operating temperature be lower than 85°C. A temperature above -40°Cshould be used for the operation. A minimum supply voltage of 4.75V is required for these RS flip flops to operate. There is a maximum supply voltage of 5.25V. This logic IC is BUS DRIVER. It is equipped with 1 Functions . It is equipped with 20 pin count.
74FCT374CTSOG Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
74FCT374CTSOG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT374CTSOG Flip Flops applications.
- Memory
- Count Modes
- Memory
- Shift registers
- ESD performance
- Instrumentation
- Set-reset capability
- Frequency Dividers
- Balanced 24 mA output drivers
- Data Synchronizers
