74FCT374CTSOG8
| Parameters | |
|---|---|
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 5.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -15mA |
| Low Level Output Current | 15mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 6pF |
| Length | 12.8mm |
| Width | 7.6mm |
74FCT374CTSOG8 Overview
The flip flop is packaged in a case of SOIC. In total, it contains 1 elements. A total of 20terminations have been recorded. Power is provided by a 5V supply. Devices in the FCTfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. It is designed with a number of bits of 8. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. The D latch operates on 5V volts. The D flip flop is embedded with 2ports. In order to ensure high efficiency, the supply voltage should remain at 5V. In terms of quiescent current, it consumes 1mA . A high level output current of -15mAis set. Low level output current is set to 15mA. Ideally, the operating temperature should be lower than 85°C. It is recommended that the operating temperature be greater than -40°C. Initially, it requires a voltage of 4.75V as the minimum supply voltage. It supports a maximum supply voltage of 5.25V volts. BUS DRIVERis used as the logic IC in this D flip flop. There are 1 functions available on this T flip flop. A total of 20 pins are present on this device.
74FCT374CTSOG8 Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
74FCT374CTSOG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT374CTSOG8 Flip Flops applications.
- Latch-up performance
- Individual Asynchronous Resets
- Storage registers
- Asynchronous counter
- ESCC
- Data storage
- Matched Rise and Fall
- Single Up Count-Control Line
- Registers
- QML qualified product
