74FCT377ATQG
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 7.2 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 7.2 ns |
| Family | FCT |
| Logic Function | AND, D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | D FLIP-FLOP |
| High Level Output Current | -15mA |
| Low Level Output Current | 12mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 6pF |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT377ATQG Overview
It is packaged in the way of SSOP. A total of 1elements are contained within it. It has been determined that there have been 20 terminations. Power is supplied from a voltage of 5V volts. In this case, the D flip flop belongs to the FCTfamily. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. The flip flop is designed with 8bits. The power supply is 5V. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. Despite external influences, it consumes 1mAof quiescent current. It is also characterized by WITH HOLD MODE. The high level output current is set to -15mA. The low level output current is set to 12mA. Operating temperatures should be lower than 85°C. A temperature above -40°Cshould be used for the operation. The minimal supply voltage is 4.75V. There is a maximum supply voltage of 5.25V. It uses the logic IC D FLIP-FLOP. There are 1 functions available on the JK flip flop. It has 20 pins.
74FCT377ATQG Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
74FCT377ATQG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT377ATQG Flip Flops applications.
- Balanced Propagation Delays
- Storage registers
- ESD performance
- Consumer
- Circuit Design
- Frequency division
- Buffered Clock
- High Performance Logic for test systems
- Clock pulse
- Registers
