74FCT377ATSOG
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 7.2 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 7.2 ns |
| Family | FCT |
| Logic Function | AND, D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | D FLIP-FLOP |
| High Level Output Current | -15mA |
| Low Level Output Current | 12mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 6pF |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT377ATSOG Overview
The flip flop is packaged in SOIC. D latch consists of 1 elements. The number of terminations is 20. It is powered by a voltage of 5V . It belongs to the family of electronic devices known as FCT. The electronic part is mounted in the way of Surface Mount. 20pins are included in its design. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. 8bits are used in its design. An electrical current of 5V volts is applied to it. In order to achieve high efficiency, the supply voltage should be maintained at 5V. Quiescent current is consumed by the D latch in the amount of 1mA. Additionally, it is characterized by WITH HOLD MODE. High level output current is set to -15mA. In the low level output current setting, the current is set to 12mA. The operating temperature should be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. The minimal supply voltage is 4.75V. It supports a maximum supply voltage of 5.25V volts. In this case, it uses a D FLIP-FLOP logic IC. A total of 1 functions are available on the T flip flop. There are 20 pins on the D latch.
74FCT377ATSOG Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
74FCT377ATSOG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT377ATSOG Flip Flops applications.
- Balanced 24 mA output drivers
- Buffer registers
- Cold spare funcion
- ESD protection
- EMI reduction circuitry
- Clock pulse
- Communications
- Digital electronics systems
- Set-reset capability
- Latch
