banner_page

74FCT377ATSOG8

8 Bit Flip Flop DUAL 20 Pins SOIC


  • Manufacturer: Integrated Device Technology (IDT)
  • Nocochips NO: 378-74FCT377ATSOG8
  • Package: SOIC
  • Datasheet: PDF
  • Stock: 164
  • Description: 8 Bit Flip Flop DUAL 20 Pins SOIC(Kg)

Details

Tags

Parameters
Number of Terminations 20
ECCN Code EAR99
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature WITH HOLD MODE
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 5V
Number of Elements 1
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Load Capacitance 50pF
Number of Bits 8
Propagation Delay 7.2 ns
Quiescent Current 1mA
Turn On Delay Time 7.2 ns
Family FCT
Logic Function AND, D-Type
Output Characteristics 3-STATE
Logic IC Type D FLIP-FLOP
High Level Output Current -15mA
Low Level Output Current 12mA
Clock Edge Trigger Type Positive Edge
Capacitance - Input 6pF
Height Seated (Max) 2.65mm
Length 12.8mm
Width 7.6mm
Thickness 2.34mm
RoHS Status RoHS Compliant
Lead Free Lead Free
Contact Plating Tin
Mount Surface Mount
Package / Case SOIC
Number of Pins 20
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Discontinued
Moisture Sensitivity Level (MSL) 1

74FCT377ATSOG8 Overview


SOICis the way it is packaged. There are 1 elements in it. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Power is provided by a 5V supply. The electronic device belongs to the FCTfamily. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. The clock edge trigger type for this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. An electronic part designed with 8bits is used in this application. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. There are 5V power supplies attached to it. In order to ensure high efficiency, the supply voltage should remain at 5V. Despite external influences, it consumes 1mAof quiescent current. Additionally, it is characterized by WITH HOLD MODE. -15mAis set as the high level output current. In the low level output current setting, 12mAis used. Operating temperatures should be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. Normally, it operates with a voltage of 4.75VV as its minimum supply voltage. 5.25Vis its maximum supply voltage. It uses a logic IC with a D FLIP-FLOP value. There are 1 functions available on the JK flip flop. A total of 20 pins are present on this device.

74FCT377ATSOG8 Features


20 pins
8 Bits
5V power supplies
1 Functions
20 pin count

74FCT377ATSOG8 Applications


There are a lot of Integrated Device Technology (IDT) 74FCT377ATSOG8 Flip Flops applications.

  • Data storage
  • Data transfer
  • Power down protection
  • Automotive
  • Memory
  • Shift registers
  • Set-reset capability
  • Modulo – n – counter
  • Dynamic threshold performance
  • Count Modes

Write a review

Note: HTML is not translated!
    Bad           Good