74FCT377CTQG
| Parameters | |
|---|---|
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 5.2 ns |
| Family | FCT |
| Logic Function | AND, D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | D FLIP-FLOP |
| High Level Output Current | -15mA |
| Low Level Output Current | 12mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 6pF |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | WITH HOLD MODE |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
74FCT377CTQG Overview
It is embeded in QSOP case. The element count is 1 . The number of terminations is 20. A voltage of 5V provides power to the D latch. An electronic device belonging to the family FCTcan be found here. The electronic part is mounted in the way of Surface Mount. There are 20pins on it. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. 8bits are used in its design. It operates from 5V power supplies. In order to achieve high efficiency, the supply voltage should be maintained at 5V. 1mAquiescent current consumed. Furthermore, it has WITH HOLD MODEas a characteristic. It is set to -15mAfor the high level output current. A 12mAvalue is set for low-level output current. The operating temperature should be lower than 85°C. It should be higher than -40°Cwhen the system is operating. The system operates with a minimum supply voltage of 4.75V. 5.25Vis the maximum supply voltage it supports. This logic IC is D FLIP-FLOP. There are 1 functions associated with the JK flip flop. This device is equipped with a pin count of 20.
74FCT377CTQG Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
74FCT377CTQG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT377CTQG Flip Flops applications.
- Differential Individual
- Control circuits
- Patented noise
- Computers
- Data storage
- Storage registers
- Reduced system switching noise
- Bus hold
- Supports Live Insertion
- Balanced Propagation Delays
