74FCT377CTSOG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74FCT377 |
| Function | Set(Preset) and Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Current - Quiescent (Iq) | 1mA |
| Current - Output High, Low | 12mA 48mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 6pF |
74FCT377CTSOG Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. Package Tubeembeds it. In the configuration, Non-Invertedis used as the output. The trigger configured with it uses Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. The operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74FCT series. A total of 1elements are present in it. This process consumes 1mA quiescents. You can search similar parts based on 74FCT377. Its input capacitance is 6pF farads.
74FCT377CTSOG Features
Tube package
74FCT series
74FCT377CTSOG Applications
There are a lot of Renesas Electronics America Inc. 74FCT377CTSOG Flip Flops applications.
- Synchronous counter
- Differential Individual
- ESD performance
- Bus hold
- Shift Registers
- Circuit Design
- ESCC
- Latch-up performance
- CMOS Process
- Single Down Count-Control Line
