74FCT543CTQG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 24 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Ports | 2 |
| Propagation Delay | 8 ns |
| Quiescent Current | 1mA |
| Family | FCT |
| Logic Function | Inverting, Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE |
| Logic IC Type | REGISTERED BUS TRANSCEIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Prop. Delay@Nom-Sup | 5.3 ns |
| High Level Output Current | 64mA |
| Low Level Output Current | 15mA |
| Control Type | INDEPENDENT CONTROL |
| Translation | N/A |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT543CTQG Overview
Logical driver uses a neat QSOP package. All of the 1 elements are put into use. 24 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. In the FCT family, the electric component belongs. 24 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 24 pins. Enhanced with 2 ports. The bus transceiver employs 8 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under INDEPENDENT CONTROL control technology. In quiescent state, the electronic part uses 1mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Logical driver features INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH to better serve the need. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 15mA to its low level. In high level output mode, the electronic parts may conduct 64mA of current. Voltage used to run voltage buffer should be 4.75V at least. In regard to the maximum supply voltage, buffer driver is rated 5.25V. It is known as a REGISTERED BUS TRANSCEIVER logic IC.
74FCT543CTQG Features
Bus Driver/Transceivers
INDEPENDENT OUTPUT ENABLE FOR EACH DIRECTION; MASTER CONTROL FOR LATCH
High Level Output: 15mA
Low Level Output: 64mA
REGISTERED BUS TRANSCEIVER Logic IC
74FCT543CTQG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT543CTQG Buffers & Transceivers applications.
- Wireless modems
- Laser diode bonding
- Copper and fiber optic cables connection network
- AV receiver
- Cordless telephone
- Long-distance fiber optic network applications
- VoIP phones
- Carrier phase observations
- Home theater wiring-free
- Ethernet circuitry
