74FCT573ATQG
| Parameters | |
|---|---|
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 48mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
74FCT573ATQG Overview
In the QSOP package, it is embedded. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. This electronic device belongs to the family of FCT. This board has 20 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. This part is included in FF/Latches. There are 5V power supplies attached to it. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There is also BROADSIDE VERSION OF 373 characteristics to it. In the low level output current, the value is set to 15mA. The high level output current is set to 48mA. Operating temperatures should be below 85°C. It is recommended that the operating temperature be higher than -40°C. There is a maximum voltage supply of 5.25V that can be applied to it. A minimal voltage of 4.75V is needed to operate it. A BUS DRIVER logic IC is used.
74FCT573ATQG Features
QSOP package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT573ATQG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT573ATQG Latches applications.
- Counter control
- Timers
- A/D converters
- Communication systems
- Automotive ADAS
- Frequency
- Sample and hold register
- Serial Output Data Queuing
- Double bus register system
- BCD counting
