74FCT573ATQG8
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 8.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | 48mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
74FCT573ATQG8 Overview
In the package QSOP, it can be found. The design of this electronic part is based on 8 bits. This device has been designed with 20 terminations available. In order to function, the supply voltage should be set to 5V. There are 20 pins attached to it. It is a member of the FCT family of electronic devices. In addition, it is designed with a pin number of 20. Electronic parts are mounted using the Surface Mount method. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. The system is powered by 5V sources. On the basis of its reliability, this device is well suited for TAPE AND REEL. Optimal efficiency requires 5V as the supply voltage. Additionally, it is characterized by BROADSIDE VERSION OF 373. It is set to zero for the low level output current. 48mA is the high level output current. Lower than 85°C is the recommended operating temperature. It is recommended to operate at a temperature higher than -40°C. 5.25V is the maximum voltage it supports. The minimal supply voltage is 4.75V. A logic IC that is used in this application is BUS DRIVER.
74FCT573ATQG8 Features
QSOP package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT573ATQG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT573ATQG8 Latches applications.
- Automotive Infotainment
- Pattern Generators
- High-speed logic
- Programmable binary
- Audio and video switching
- Lamp and Display (LED)
- Shift left with parallel loading
- Multistage ripple counting
- Frequency dividing
- Shift right with parallel loading
