74FCT573CTQG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 4.2 ns |
| High Level Output Current | 48mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT573CTQG Overview
The QSOP package contains it. With this electronic part, there are 8 bits. This device is designed with 20 terminations. The device works with a voltage of 5V for its supply voltage. With 20 pins, it is equipped. It is a member of the FCT family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is used to mount this electronic part. This device has a total of 2 ports. This part is included in FF/Latches. The device is powered by 5V power supplies. A high efficiency supply voltage should be maintained at 5V. Additionally, it is characterized by BROADSIDE VERSION OF 373. There is 15mA low level output current set. 48mA is the high level output current. There should be a temperature below 85°C at which the system is operating. Temperatures higher than -40°C should be used for operation. There is a maximum voltage of 5.25V supported. A minimal voltage of 4.75V is needed to operate it. There is a logic IC BUS DRIVER used in the system.
74FCT573CTQG Features
QSOP package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT573CTQG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT573CTQG Latches applications.
- Shift left register
- Display
- Decade counting 7-segment decimal display
- Multistage ripple counting
- Data acquisition
- Parallel Input
- A/D converters
- Buffer register
- Shift right with parallel loading
- Programmable binary
