74FCT573CTQG8
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 4.2 ns |
| High Level Output Current | 48mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT573CTQG8 Overview
In the QSOP package, it is embedded. This electronic part is designed with 8 Bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With the supply voltage set at 5V, it is able to operate. With 20 pins, it is equipped. It is a member of the FCT family of electronic devices. The 20 pins are designed into it. Surface Mount is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. 5V power supplies are needed to operate it. As a result of its reliable performance, it is well suited for TAPE AND REEL. In order to achieve high efficiency, the supply voltage should be kept at 5V. In addition to that, it is also characterized by BROADSIDE VERSION OF 373. There is 15mA low level output current set. 48mA represents the high level output current. Operating temperatures should be below 85°C. A temperature greater than -40°C should be used as the operating temperature. Voltages up to 5.25V can be supplied. There is a minimum supply voltage of 4.75V for it. It uses a logic IC of type BUS DRIVER.
74FCT573CTQG8 Features
QSOP package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT573CTQG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT573CTQG8 Latches applications.
- BCD counting
- Relay replacement
- Automotive Body Electronics
- Parallel Input
- Digital bus buffer
- Up/down difference counting
- Relay
- Stacked or Push-Down Registers
- Pattern generators
- Phase comparator
