74FCT573CTSOG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Prop. Delay@Nom-Sup | 4.2 ns |
| High Level Output Current | 48mA |
| Low Level Output Current | 15mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT573CTSOG Overview
The package in which it is embedded is named SOIC. The design of this electronic part contains 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. The device works with a voltage of 5V for its supply voltage. 20 pins are included. It is a member of the FCT family of electronic devices. It is designed with 20 pins. A Surface Mount mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. A total of 5V power supplies are needed to run it. A high level of efficiency is achieved by maintaining the supply voltage at 5V. There is 15mA low level output current set. In the high level output current, the value is set to 48mA. A temperature below 85°C should be used for operation. It is recommended that the operating temperature be higher than -40°C. 5.25V is the maximum voltage it supports. A voltage of 4.75V is the minimum supply voltage required for it to operate. A logic IC that is used in this application is BUS DRIVER.
74FCT573CTSOG Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
74FCT573CTSOG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT573CTSOG Latches applications.
- Parallel Input
- Meter applications
- Communication systems
- Timers
- Network Switches
- Serial Input
- Shift left register
- Parallel data synchronization
- General-Purpose Register
- Pattern Generators
