74FCT574ATSOG8
| Parameters | |
|---|---|
| Width | 7.6mm |
| Thickness | 2.34mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 6.5 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 6.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -15mA |
| Low Level Output Current | 15mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 6pF |
| Length | 12.8mm |
74FCT574ATSOG8 Overview
It is packaged in the way of SOIC. In total, it contains 1 elements. There are 20 terminations,An input voltage of 5Vpowers the D latch. Devices in the FCTfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. This board is designed with 20pins on it. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. An electronic part with 8bits has been designed. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. It operates from 5V power supplies. This D flip flop is equipped with 0 ports. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. In terms of quiescent current, it consumes 1mA . Additionally, it is characterized by BROADSIDE VERSION OF 374. There is -15mA output current at the high level. There is no low level output current set at 15mA. If the operating temperature is lower than 85°C, it is recommended. It is recommended that the operating temperature is higher than -40°C. The system operates with a minimum supply voltage of 4.75V. It supports a maximum supply voltage of 5.25V volts. BUS DRIVERis the logic IC it uses. A total of 1 functions are provided by this T flip flop. This device is equipped with a pin count of 20.
74FCT574ATSOG8 Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
74FCT574ATSOG8 Applications
There are a lot of Integrated Device Technology (IDT) 74FCT574ATSOG8 Flip Flops applications.
- Differential Individual
- Functionally equivalent to the MC10/100EL29
- Synchronous counter
- Counters
- Guaranteed simultaneous switching noise level
- Buffer registers
- CMOS Process
- Latch-up performance
- Common Clocks
- Circuit Design
