74FCT574CTQG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | QSOP |
| Number of Pins | 20 |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 5.5 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -15mA |
| Low Level Output Current | 15mA |
| Clock Edge Trigger Type | Positive Edge |
| Capacitance - Input | 6pF |
| Length | 8.7mm |
| Width | 3.8mm |
| Thickness | 1.47mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74FCT574CTQG Overview
As a result, it is packaged as QSOP. D latch consists of 1 elements. There have been 20 terminations. Power is provided by a 5V supply. It belongs to the family of electronic devices known as FCT. There is an electronic part mounted in the way of Surface Mount. 20pins are included in its design. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. This flip flop is designed with 8 Bits. It operates from 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It consumes 1mA of quiescent current without being affected by external factors. Additionally, it is characterized by BROADSIDE VERSION OF 374. A -15mAis set for the high level output current. 15mA is the low level output current. If the operating temperature is lower than 85°C, it is recommended. Operating temperatures should be above -40°C. The minimum voltage required for operation is 4.75V. There is a maximum supply voltage of 5.25V. In this case, it uses a BUS DRIVER logic IC. It is equipped with 1 Functions . 20pins are provided on the D latch.
74FCT574CTQG Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
74FCT574CTQG Applications
There are a lot of Integrated Device Technology (IDT) 74FCT574CTQG Flip Flops applications.
- Load Control
- Convert a momentary switch to a toggle switch
- Registers
- Patented noise
- Common Clocks
- Shift registers
- Storage registers
- Bounce elimination switch
- Reduced system switching noise
- 2 – Bit synchronous counter
