74FST3126DR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 74FST |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Bus Switch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Base Part Number | 74FST3126 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Propagation Delay (tpd) | 0.25 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
74FST3126DR2 Overview
Due to the fact that it is provided in the 14-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) is the packaging method.The mounting method digital switch ic uses is Surface Mount.the multiplexers uses an analog IC Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.The multiplexers can be used for a wide range of applications since they are members of 74FST series.As part of its basic configuration, 14 terminations are designed as a part of it.The base part number is 74FST3126, so you can find its logic switch related parts using that number.The multiplexer's system works with 4.5V voltage.This turn signal switch consists of 14 component pins.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 1 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.5V.There is a power supply provided for the mux switch's normal operation of 5V.This is a signal switch that is categorized as Bus Driver/Transceivers.The resistance of the signal switching is 2.
74FST3126DR2 Features
Supplied in the 14-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
74FST3126DR2 Applications
There are a lot of ON Semiconductor 74FST3126DR2 Signal Switches / Multiplexers / Decoders applications.
- Solenoid cooling fan
- War field flying robot with a night vision flying camera
- Memory system of computers
- High-performance memory-decoding applications
- To select different devices in microprocessor output
- To select different task for memory in microprocessor memory systems
- Relay
- Data demultiplexing
- Recording transmission
- Frequency multiplexing system
