74FST3126QSR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 74FST |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Bus Switch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FST3126 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Throw Configuration | SPST |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Propagation Delay (tpd) | 0.25 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 4 |
| Height Seated (Max) | 1.73mm |
| Width | 3.9116mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
74FST3126QSR Overview
Due to the fact that it is provided in the 16-SSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.As a member of 74FST series, the multiplexers can be used for a wide range of applications.There are 16 terminations included in its basic configuration.To find signal switch's related components, a base part number of 74FST3126 may also be used.For multiplexer's system, 4.5V voltage is supplied.In this turn signal switch, there are 16 component pins.As a result, GULL WING represents the end of the conductors.Single is used as its supply type.This unit is mounted in the way of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 1 bits that are provided.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 5.5V.A power supply is provided for mux switch's normal operation of 5V.The part belongs to the Bus Driver/Transceivers category of signal switches.A resistance of 2 is used to operate the signal switching.
74FST3126QSR Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
74FST3126QSR Applications
There are a lot of ON Semiconductor 74FST3126QSR Signal Switches / Multiplexers / Decoders applications.
- Textile mills
- RF-based home automation system
- Data communication
- Electronically controlled engine system
- Decimal decoder
- Communication system
- Enabling block of memory depending on address in memory chips
- Home automation system
- PCIe
- Code conversion
