74FST3257DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 23 hours ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74FST |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer/Demultiplexer |
| Subcategory | Other Logic ICs |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74FST3257 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 4 |
| Number of Bits | 8 |
| Throw Configuration | DPST |
| Propagation Delay | 250 ps |
| Quiescent Current | 3μA |
| Turn On Delay Time | 5.7 ns |
| Family | CBT/FST/QS/5C/B |
| Logic Function | Demultiplexer, Multiplexer |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 5.1mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74FST3257DTR2G Overview
It is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.A digital IC Multiplexer/Demultiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.A supply voltage of 4V~5.5V provides digital controlled switch's superior flexibility for designers.With the 74FST series, the multiplexers are suitable for a diverse range of applications.Its basic configuration includes terminations in the 16 range.There is a base part number 74FST3257 that can be used to locate signal switch's related components as well.The multiplexer's system is powered by 5V voltage.There are 16 component pins in this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply Single that is employed in this case.It is configured with 16 pins.The logic switch object belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 8 bits.Vsup should be kept at 4V to prevent some unnecessary failures.For mux switch's normal operation, power supply 5V is provided.In order for the turn signal switch to work, there are 1 outputs.I would classify the digital switch ic as an electronic part belonging to the Other Logic ICs category.In the absence of external influences, it consumes 3μA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The turn signal switch's circuit consists of 4 transmission channels.
74FST3257DTR2G Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
74FST3257DTR2G Applications
There are a lot of ON Semiconductor 74FST3257DTR2G Signal Switches / Multiplexers / Decoders applications.
- Make half adder
- Data distribution
- Automatic health monitoring systems
- Logic circuits
- Idle motor
- Used to connect a single source to multiple destinations
- Data demultiplexing
- Audio transmission
- Memory system of computers
- D/A converters
