74FST3861DTR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 74FST |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74FST3861 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | 64mA |
| Propagation Delay (tpd) | 0.25 ns |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
74FST3861DTR2 Overview
It is included in the 24-TSSOP (0.173, 4.40mm Width) in order to save board space.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.As the analog part, the circuit uses an analog IC Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.The turn signal switch is designed for use with a 4V~5.5V supply voltage, which gives it a lot of flexibility.The multiplexers from 74FST series can be used for a wide range of applications.As part of its basic configuration, 24 terminations are designed as a part of it.There is a base part number of 74FST3861 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is supplied with a voltage of 5V.Signal switch has 24 component pins.It is the end of conductors that is represented by GULL WING.The supply type of this multiplexer ic is Single.The mounting is in the way of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides 10 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.This is a signal switch that is categorized as Bus Driver/Transceivers.2 is the resistance at which it operates.
74FST3861DTR2 Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
74FST3861DTR2 Applications
There are a lot of ON Semiconductor 74FST3861DTR2 Signal Switches / Multiplexers / Decoders applications.
- A robotic vehicle with the metal detector
- CNC machines
- Paper plants
- Computer memory
- Enabling different functions units in microprocessor instruction decoding
- To select different devices in microprocessor input
- D/A converters
- A/D converters
- Enabling block of memory depending on address in memory chips
- Electronics industry
