74FST3861DWR2
| Parameters | |
|---|---|
| Type | Bus Switch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Base Part Number | 74FST3861 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | 64mA |
| Propagation Delay (tpd) | 0.25 ns |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 74FST |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
74FST3861DWR2 Overview
This is a relatively small item of digital switch that is included in the 24-SOIC (0.295, 7.50mm Width) in order to save space on the board.Tape & Reel (TR) represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Design engineers have more flexibility when digital controlled switch operates at 4V~5.5V voltage.With the 74FST series, the multiplexers are suitable for a diverse range of applications.This configuration includes 24 terminations as part of its basic functionality.You can also find related parts by using its logic switch base part number of 74FST3861.For multiplexer's system, a voltage of 5V is supplied.Signal switch has 24 component pins.As a result, conductors end at GULL WING.Its supply type is Single, which is used as the source of power.As you can see, it is mounted in the direction of Surface Mount.The logic switch belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 10 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.The maximal supply voltage (Vsup) should be kept at 5.5V to avoid some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.2 is the resistance at which it operates.
74FST3861DWR2 Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V
74FST3861DWR2 Applications
There are a lot of ON Semiconductor 74FST3861DWR2 Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Microprocessor instruction decoding
- Code conversion
- Enabling different functions units in microprocessor instruction decoding
- Night vision cameras
- Electronic circuits
- Data-routing applications
- Arithmetic Logic Units
- Used to connect a single source to multiple destinations
- Speed synchronization of multiple motors in industries
