74FST3861QSR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 74FST |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FST3861 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | 64mA |
| Propagation Delay (tpd) | 0.25 ns |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
74FST3861QSR Overview
Due to the fact that it is provided in the 24-SSOP (0.154, 3.90mm Width), digital switch allows the board to be compacted.Tape & Reel (TR) is the packaging method.Digital switch ic uses a Surface Mount mounting method.the multiplexers uses IC Bus Switch as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 4V~5.5V voltage.With the 74FST series, the multiplexers are suitable for a diverse range of applications.It is designed with 24 terminations as part of its basic configuration.There is a base part number of 74FST3861 which can also be used in order to locate the logic switch that are related to this item.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 24 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply Single that is employed in this case.The mount is in Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.The multiplexer ic provides 10 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.The maximal supply voltage (Vsup) should be kept at 5.5V to avoid some unnecessary failures.A power supply is provided for mux switch's normal operation of 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceivers.This signal switching operates at a resistance of 2.
74FST3861QSR Features
Supplied in the 24-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
74FST3861QSR Applications
There are a lot of ON Semiconductor 74FST3861QSR Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- Home automation system
- Logic circuits
- Audio transmission
- Analog to digital conversion
- Combinational circuit
- Medical industry
- Enabling block of memory depending on address in memory chips
- Electronics industry
- Video transmission
