74FST6800DTR2
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Bus Switch |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceivers |
| Technology | CMOS |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FST6800 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Qualification Status | Not Qualified |
| Circuit | 10 x 1:1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 10 |
| Throw Configuration | SPST |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| High Level Output Current | 64mA |
| Propagation Delay (tpd) | 0.25 ns |
| Low Level Output Current | 15mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 74FST |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
74FST6800DTR2 Overview
In order to conserve board space, digital switch is included in the 24-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.In the multiplexers, the analog IC is indicated by Bus Switch.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.With the 74FST series, the multiplexers are suitable for a diverse range of applications.There are 24 terminations included in its basic configuration.There is a base part number 74FST6800 that can be used to locate signal switch's related components as well.The multiplexer is supplied with 5V voltage.This turn signal switch has 24 component pins.GULL WING represents the end of conductors.As a type of supply, Single is employed.The mounting is in the way of Surface Mount.There is a family of CBT/FST/QS/5C/B members.In the signal multiplexer, there are 10 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.Keeping Vsup at 5.5V will prevent some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.This signal switching operates at a resistance of 2.
74FST6800DTR2 Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
74FST6800DTR2 Applications
There are a lot of ON Semiconductor 74FST6800DTR2 Signal Switches / Multiplexers / Decoders applications.
- High-performance memory-decoding applications
- Code converters
- HD surveillance system
- Medium scale TV wall
- To select different devices in microprocessor output
- Data distribution
- Speed synchronization of multiple motors in industries
- RF-based home automation system
- Audio transmission
- To select different task for memory in microprocessor memory systems
